Original Creative Tool Holders From Iscar Guide The Way In Machining Effectiveness

Iscar's Heliturn platform features a unique, double-sided insert with 4 cutting edges for Fast Metal Removal (FMR) turning. The brand new Heliturn is a tangentially clamped insert with a unique helical shaped cutting edge, useful for immense depths of cut and higher than common feed rate. The LNMX...-HT Heliturn insert is screw-clamped into the SLANR tool holder and reinforced by the TLN ..-HT carbide seat. This seat has ground surfaces on the top and bottom, to establish perfect contact of the insert with the tool holders. The upper rake face of the insert is mounted level with the top of the tool holder to facilitate chips to flow across the insert, without being afflicted by clamps or the tool holder body. The 4 curved helical cutting edges assure positive radial rake angles and soft penetration into the material being cut. The decreased forces and smaller loads ensure better tool longevity, greater stability and the ability to use particularly tremendous depths of cut and elevated feeds. The chipformer, deforms and breaks the chip into rib type curved segments which can easily be removed from the cutting area. The insert has a frontal clearance angle of 3.7 with a 6 side clearance angle to allow machining to a 90 shoulder. Depth of cut up to .315" and facing depths to .126" at up to .047" IPR are feasible with Heliturn.

When opposed to CNMG/M 16... or WNMG/M 13... insert sizes with the identical corner radius, much improved tool life can be envisioned when using the LNMX 1506..-HT insert. Iscar has recently added a smaller size to the Heliturn family - the LNMX 1104..R/L-HT insert and tool holder for the medium application range of up to .197" depth of cut. The new insert features all of the blessings of the larger insert. This heightens the economical benefit in the medium machining application extent. When compared to CNMG/M 43. 12... or WNMG/M 43. 08... insert sizes with the same corner radius, a substantially better tool life can be expected. The inserts are available in .031, .047 and .063" tool nose radii. Heliturn inserts are available in the most superior carbide grades: IC9025, IC3028 , IC428, IC907, and IC908.

The external tool holders are available in 1, 1.25 and 1.5" shank sizes. Boring bars are offered in 1, 1.25 1.5 and 2" bar sizes. Also offered are exchangeable heads. These tool holders have Iscar's unique Hard Touch coating, which extends holder life and thwarts corrosion. As a result of the location of this insert, machining next to the tailstock is achievable.

The high positive rake angle of these tools allows 10-15% less power usage than traditional tool holders at the same parameters.

By using Iscar's Heliturn tools, tremendous cost savings and profitability in lathe processes is assured.

A Unique 80 Degree Rhombic Insert with high helical cutting edge for high metal removal rates Iscar is presenting the CNMX 1207..-HTW insert family. The brand new insert has a very positive radial, helical cutting edge and a positive rake angle; a incorporation which substantially reduces the cutting forces. The insert's corner has a wiper configuration which supplies high surface finish even at high feed conditions, which in abundant occasions can omit a finishing cut. The corner angle is 88 degrees which provides expanded strength. The CNMX inserts were produced for heavy machining applications. Their distinctive design ensures reliable, fast metal removal when using 80 degree rhombic inserts. They can be mounted on any standard tool holder that carries regular CNMG inserts, but the seat has to be replaced with a special seat: TCH 4. Iscar's R-clamp tool holders are highly favored for heavy machining applications.

Megger Tester Provide Services On Several Fields In The Electrical Industry
In the electrical industry there really is no margin for error. Strict guidelines have been put into place to maintain the highest of standards, and more importantly the safety of personnel.

Purchasing A Megger Tester: Most Excellent Methods
A Megger tester is a device that is commonly used in electrical contracting to determine if the system has been properly installed.

Corded Or Cordless Power Equipment - Which May Be Regarded As The Best?
The DIY and the construction industry or market are awash with power tools of various types and of course financial values.

Wood Working Is A Craft That Needs Adequate Ability And Creativity.
Woodworking is a craft that requires adequate skill and creativity. The skill of a woodworker is translated to the wood with the use of appropriate wood carving tools. One brand that is popular among Northern Tools customers is Grizzly Woodworking tools.

Megger Tester - The Standard Of The Sector
Every field of business has a company that not only helps set the standards for the industry, but leads it in a remarkable way. These companies are always innovative, and have established themselves as an expert that others look up to and strive to be like.

Looking At The Actual Kreg Jig Pocket Hole Device
Ask any woodwork enthusiasts what is the most popular and familiar of tools to them and invariably the response will be the pocket hole jig. This is of course that tool which allows wood to be joined together through the pocket hole joints it makes.